VESTEL EDIT BY USB OPERATION.

VESTEL FIRMWARE EDIT TRICKS BY USB OPERATION .

Vestel profile edit tricks and tools with USB Operations.

Important vestel profile:

As we know that most of the mains of this company do not allow us to change the panel properties or activate other options in service mode. To activate these options, there is a tool called vestel profile.

vestel tv devices service mode.

Before entering the topic, I see it necessary to address something else, which is the Hotel Mode feature. When the feature is activated, the screen opens to the word welcome and remains fixed. By pressing any button on the remote, it disappears, but the screen does not work normally. To exit the hotel mode press the key MENU in the vestel remote and 7935 in seccession, then we deactivate the hotel mode.

There is another thing that can be done by entering the vestel hotel mode, which is saving the channels on the USB and re-downloading them to a similar vestel device by pressing one of the two options such as dowload from usb or download to usb (something like that).

Now we start explaining in some vestel category.

17MB82 vestel profile:

To download files from the screen, it is enough to put an empty file named READ.

Enter the service mode by the vestel remote control key MENU 4725 and press USB Operation

(I am writing now from memory, please correct me if I am wrong in the comment). The process takes less than a minute, and when it is finished, the device automatically exits download mode.

We now have files between It has all the data (image, sound, receiver, language .. everything) We keep those files on the computer in a file that is preferably compressed and write the important information on it for the need.

VESTEL Profile USB Operations:

Now we want to transfer the information to a similar vestel devices screen, let's assume that we want to modify the vestel panel only, meaning we have a ghost vestel image, inverted, etc.

We create a new file called pq and put in it the PCF, PTF files.

The screen is on We put the USB in the screen We wait until it recognizes it and enter the vestel service mode.

We press USB operation When the process is finished, we exit the service mode and restart the vestel device.

Here I don't remember whether the modifications are done directly after restarting or a few minutes later, the important thing is that it is okay to wait a little.

As for the rest of the mains The method is almost the same, but instead of the READ file we need two or three files downloadpq.mbxx and downloadprofile.mbxx.

with xx = the main number For 17MB95M.

Exemple for vestel 17MB95M profile:

For example, we just write downloadprofile.mb95.

To get the panel information, we put the file downloadpq.mb95 in the USB.

In order for the device to send all files at once to the USB, we put three files in the USB:

• downloadpq.mb95

• downloadprofile.mb95

• DownloadSpi.mb95

To change the panel properties, we put the VESTEL_D1_Plus_PNL PIN file in the USB root alone or with VESTEL_D1_Plus_TMG

In the event that the image is absent as a result of passing a file that is not compatible with the panel resolution, it can be recovered in the following way:

1. Disconnect the VESTEL device from electricity,

2. put the pq file in the USB root, connect it to the USB port of the vestel device,

3. turn on the vestel device and wait a minute,

4. press in the vestel remote menu key, wait a few seconds, then 4725 in succession,

5. wait a few seconds (10 seconds is enough)

6. Press the up arrow.. Wait a few seconds.

Press ok and wait half a minute.. As a precaution, a minute is more than enough,

press menu, then restart the vestel device.

I managed to find some programs for vestel profile edition:

• SwProfile_patcher_kurulumsuz

• Vestl profile reader V2

• profiller

• vestel_tools

• Files.fm_2018-10-05_nzps29e8

• vestel panel editor v1

To be downloaded from link bellow: