Nissan Qashqai Car Radio Daewoo AGC-0071RF
nissan AGC-0071RF code
If your Nissan Qashqai's car radio suddenly stopped working, shows an error code, or behaves abnormally, you’re in the right place. This post provides a downloadable repair firmware file for the **Daewoo AGC-0071RF** radio used in the Nissan Qashqai. This includes a working EEPROM dump for the FM24V01 (compatible with 24C128), and instructions to restore your radio back to its factory state.
Understanding the technical specifications of your car radio is essential before attempting firmware repair. Here's a breakdown:
Car Brand & Model: Nissan Qashqai
Radio Manufacturer: Daewoo Electronics
Radio Model Number: AGC-0071RF
EEPROM Type: FM24V01 = Equivalent to 24C128
Memory Size: 128 Kbit (16 KB)
Code Type: 4-digit radio unlock code (example: **3375**)
Common Issues: Locked radio, corrupted memory, display errors, audio failure
Repair Type: EEPROM firmware restoration
The EEPROM (Electrically Erasable Programmable Read-Only Memory) chip FM24V01 is where the radio’s configuration, unlock code, and operational data are stored. If this memory becomes corrupted due to a failed software update, power surge, or battery change, the radio may become non-functional.
Our downloadable firmware file includes a verified and working binary dump (.bin) of the FM24V01 (same as 24C128), allowing technicians or DIY enthusiasts to:
Recover locked radios
Restore default configuration
Reset audio and display issues
Remove corrupted data
⚠️ Note: Always back up your original dump before flashing a new one.
To download the firmware dump for the Daewoo AGC-0071RF:
Scroll to the bottom of this post.
Click the download link labeled "AGC-0071RF\_FM24V01\_DUMP.BIN".
Extract the ZIP file to access the .BIN file.
Use an EEPROM programmer to write the file back to the FM24V01 chip.
You’ll need an EEPROM programmer like **RT809H**, **MiniPro TL866**, or **CH341A**. Here’s a simple procedure:
Desolder or clip the FM24V01 chip from the radio board.
Connect the chip to your programmer using SOIC8 clip or socket adapter.
Open your programmer software and select **24C128** or **FM24V01** as the chip type.
Load the downloaded `.BIN` file.
Write the file to the chip and verify the write operation.
Reinstall the chip into the radio board.
Power on the radio – it should boot normally.
This firmware file includes a default **unlock code: 3375**. After flashing, the radio may ask you to input the code. Use the buttons on the radio to enter the code:
Use preset buttons (1–4)** to enter each digit
Keep ** 6 ** Pressed for 3seconds to confirm
If your display shows “CODE OK” or the radio resumes operation, the repair was successful.
Replacing a stock radio in a Nissan Qashqai can be expensive and often requires additional wiring or steering control interfaces. Repairing your factory unit using the correct EEPROM firmware is:
Cheaper than a replacement
Preserves OEM design and functionality
No need to reprogram CANBUS or dashboard controls
Quick and safe with minimal tools
Always verify that your radio model matches **AGC-0071RF** before applying this firmware.
Use anti-static precautions when handling EEPROM chips.
Ensure your EEPROM programmer supports 24C128 or FM24V01.
Do not power the radio while the chip is disconnected or being programmed.
By downloading and flashing this EEPROM dump for the **Daewoo AGC-0071RF** radio found in the **Nissan Qashqai**, you can fully restore its function, resolve lock codes, and fix memory-related issues. This method is safe, effective, and cost-efficient for professional technicians and skilled hobbyists.
Make sure to handle all memory components with care and always back up your original chip data.
📥 [Download AGC-0071RF\_FM24V01\_24C128\_DUMP.BIN (ZIP)](Clik the link bellow for free)