DS-80261 REV1.0 Hikvision FIRMWARE DUMP.

Download Repair Firmware for Hikvision DS-7208HQHI-F1/N DVR – Mainboard DS-80261 REV1.0 

Download Repair Firmware for Hikvision DS-7208HQHI-F1/N DVR – Mainboard DS-80261 REV1.0

If your Hikvision DVR model DS-7208HQHI-F1/N has stopped booting, is stuck on the logo screen, or shows software errors, it may be due to corrupted firmware. This post provides a tested repair firmware solution specifically for devices with the **DS-80261 REV1.0** mainboard and **25Q128** SPI flash memory. Restoring functionality is simple when you have the correct files.

Key Characteristics of the Hikvision DS-7208HQHI-F1/N DVR

• Model:  DS-7208HQHI-F1/N

• Mainboard: DS-80261 REV1.0

• SPI Flash Memory: 25Q128

• Video Input:  8 channels

• Supported Technologies: HDTVI, AHD, CVI, CVBS, and IP

• Video Output: HDMI and VGA

• Resolution: Up to 1080p real-time recording

• Network Access: Ethernet port with remote access features

• User Access:  Default user `admin`, password `99j6816w`

• Serial Number: 556604227

• Test Pattern Verification: OK for Pattern Z

When Do You Need This Firmware?

This firmware is ideal if your DVR:

• Fails to boot or is stuck on the Hikvision logo screen

• Is not responding after a failed update

• Shows corrupted display or missing UI

• Has been bricked due to flash memory errors

Using this verified firmware dump will help you repair the DVR by flashing the 25Q128 chip with a programmer.

What’s Included in the Firmware Package?

The downloadable archive named **Software for DS-80261 REV1.0 Hikvision DS-7208HQHI-F1/N.rar** contains:

• ✅  DS-80261 REV1.0.bin  – Verified SPI flash dump for the 25Q128 memory chip

• ✅  Read passzord.txt – A text file with extraction password

• ✅  DS-80261 REV1.0.png – High-resolution image of the mainboard for correct identification

This complete package has been tested and confirmed working on units using test pattern **Z**.

How to Flash the Firmware to Your DVR

To restore your DVR:

1. Identify the Mainboard:** Open your DVR case and verify that the PCB is marked **DS-80261 REV1.0**.

2.  Check the Flash Chip:  Locate the 8-pin SPI flash IC labeled **25Q128**.

3.  Use a Programmer:  Connect the chip to a programmer such as CH341A or RT809H.

4.  Flash the BIN File:  Use software like AsProgrammer or RT809H tool to write **DS-80261 REV1.0.bin** to the chip.

5. **Reassemble and Power On:** After programming, reassemble the DVR and boot it. Your unit should start normally.

Where to Download the Firmware

You can download the verified firmware package from our firmware archive. Be sure to extract the `.rar` file using the password found in **Read password.txt**.

📦 Filename: Software for DS-80261 REV1.0 Hikvision DS-7208HQHI-F1/N.rar

🔒 Password: See inside `Read passzord.txt` after download

📁 Size:  Approx. 16MB

> Note: Do not use this firmware on a different mainboard revision or non-matching flash memory chip. Doing so may cause permanent damage.

 Additional Technical Details

• User Login After Flashing:

  -Username: `admin`

  -Password: `99j6816w`

• Serial Number:** `556604227`

• Device Address:** `0002e049`

• WRF Code:** `SWKHJI` at address `0002e000`

• Compatibility:** Confirmed working with test pattern Z

 Final Notes

If you're a technician or an advanced user with SPI programming experience, this solution can save hours of troubleshooting and potentially avoid the need to replace the DVR. Always double-check that the board revision and flash type match the details above.

For additional support or questions about programming tools, feel free to  contact us through the blog.