Embedded Files
Download HK.T.RT2861V09 firmware emmc backup repair for kivi 55U600 tv.
HK.RT2861V09 firmware TV Specifications
Below is a table outlining the key technical specifications of the KIVI 55U600 TV, which are essential for identifying the correct firmware version and repair process.
Brand: KIVI
Model: 55U600
Display Size: 55 Inches
Resolution: 3840 x 2160 (4K UHD)
Main Board: HK.T.RT2861V09
Operating System: Android Smart TV
Storage: eMMC Integrated Memory
Firmware Type: Dump File (.bin)
Programmer Required: RT809H Universal Programmer
Common Issues with KIVI 55U600 Firmware
TV turns on but no display
Stuck on boot logo
Remote and buttons unresponsive
Android system crash or freeze
Reboot loop or black screen
These symptoms are typically caused by corruption in the internal eMMC storage, often after a power surge, interrupted update, or software error.
Required Tools & Files
To perform the repair, you’ll need the following:
✅ KIVI 55U600 Firmware Dump (.bin) file
✅ RT809H Programmer
✅ RT809H Software Suite installed on a Windows PC
✅ eMMC socket or adapter compatible with RT809H
✅ Basic soldering tools (if direct connection is needed)
Download the KIVI 55U600 Firmware Dump
You can download the official or extracted firmware dump file for the KIVI 55U600 TV using the link below. Ensure the version matches the HK.T.RT2861V09 main board.
📥 [Download KIVI 55U600 eMMC Firmware Dump]
(Provide your direct or hosted download link bellow)
File Format: .bin
File Size: ~1GB
Compatible Board: HK.T.RT2861V09
Panel Size: 55” UHD
⚠️ Always verify the board and panel compatibility before flashing to avoid damage.
How to Program the eMMC with RT809H
Follow these steps to restore your TV’s firmware:
1. Connect eMMC to RT809H
Use an eMMC adapter socket compatible with your memory chip (usually BGA153 or BGA169).
If the chip is soldered, you may need to desolder it carefully and place it in the socket.
2. Launch RT809H Software
Open the RT809H software on your PC.
Select the appropriate eMMC chip model from the device list.
3. Load the Firmware File
Click on "Open File" and browse for the .bin dump file.
Load the firmware into the RT809H interface.
4. Write Firmware to eMMC
Click "Write" or "Program" to begin the flashing process.
Wait for the process to complete (typically 5–10 minutes).
5. Reassemble and Test
Reinstall the eMMC chip if removed.
Power on the TV and verify if it boots into the Android interface or logo screen.
Precautions During Flashing
⚠️ Double-check pin connections to avoid miswrites.
⚠️ Do not interrupt the flashing process.
⚠️ Always backup the original firmware, if accessible
Conclusion
Restoring a KIVI 55U600 TV with a corrupted eMMC firmware is straightforward using the RT809H programmer and the correct dump file. Make sure you identify the correct board—HK.T.RT2861V09—and use a verified .bin file to ensure successful repair. Whether you’re a technician or a DIY enthusiast, this method is reliable for reviving bricked KIVI TVs.
FAQs
Q: Can I use this firmware on a different KIVI model?
A: No. This dump file is specifically for the 55U600 model with HK.RT2861V09 mainboard.
Q: Is it safe to flash without removing the eMMC chip?
A: In-circuit flashing may be possible, but chip removal is safer and more reliable.
Q: What happens if I flash the wrong firmware?
A: Flashing the wrong file may result in a dead board or non-functional display. Always match the board version.
Page updated
Google Sites
Report abuse